Posts

konfigurasi routing di cisco pacet recer

Image
1.konfigurasi di router kiri --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]: n Press RETURN to get started! Router>en Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int gi0/0/1 Router(config-if)#ip add 192.168.2.1 255.255.255.0 Router(config-if)#n sh Router(config-if)# %LINK-5-CHANGED: Interface GigabitEthernet0/0/1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0/1, changed state to up Router(config-if)#int gi0/0/0 Router(config-if)#ip add 192.168.1.1 255.255.255.0 Router(config-if)#n sh Router(config-if)# %LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed state to up Router(config-if)#ex Router(config)#ip dhcp pool ali Router(dhcp-config)#network 192.168.2.0 255.255.255.0 Router(dhcp-config)#default-router 192.168.2.1 ganti di client dengan ipdhcp 2.konfigurasi di router kanan ...
Post a Comment
Read more

konfigurasi vlan di cisco pacet recer

Image
1.konfigurasi vlan di switch Switch>en Switch#conf t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#vlan 30 Switch(config-vlan)#name iki Switch(config-vlan)#vlan 40 Switch(config-vlan)#na Switch(config-vlan)#name iko Switch(config-vlan)#ex Switch(config)#int fa0/1 Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 30 Switch(config-if)#ex Switch(config)#int fa0/2 Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 30 Switch(config-if)#ex Switch(config)#int fa0/3 Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 40 Switch(config-if)#int fa0/4 Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 40 2.pemberian ip di komputer vlan 30 vlan 40
Post a Comment
Read more

konfigurasi dhcp dicisco packet recer

Image
KONFIGURASI DHCP DI ROUTER CISCO   1. router --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]: n Press RETURN to get started! Router>en Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int gi 0/0/0 Router(config-if)#ip add 192.168.10.1 255.255.255.0 Router(config-if)#n sh Router(config-if)# %LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0/0, changed state to up Router(config-if)#ex Router(config)#ip dhcp pool ali Router(dhcp-config)#network 192.168.10.0 255.255.255.0 Router(dhcp-config)#default-router 192.168.10.1 Router(dhcp-config)#dns-server 8.8.8.8 2.seting dhcp di client komputer  comp1  comp2  comp3
Post a Comment
Read more